Time to get stuck in to the work we need to get done before the end of the month. I have to be away for over 3 weeks in March and with the departure planned for early April we need to get ourselves sorted out. By removing the CB aerial I was able to get Elly's front end far enough into the workshop to protect me from the howling gale and driving rain that always seems to be a feature of working on anything nowadays. At least I can shelter behind the truck for at least half of the job if the wind direction is right.
But, as you can see, there's not a lot of room to spare. Certainly, if I want to jack the front end up then I have to be aware of how little room there is! Doing the same with the back end isn't possible because of the roof tent.
New windscreen wipers were a necessity after driving against the seasonal low - and blinding - sun a couple of weeks back. With the screenwash freezing on the glass and the wipers like toothbrushes I had to resort to a sponge and a puddle to see where we were going.
The second job last weekend was to sort out the brakes. I doubt, from the colour of it, that the brake fluid has been changed in quite a while...
...and while I was at it I decided to check the wheel bearings, swap the wheels and tyres for our "desert" ones and replace the rear brake pads. As usual, this became a much more involved set of jobs than I'd planned. First of all the parts I ordered took an age to arrive after the supplier declared some things were "out of stock" despite saying the opposite when I placed the order. Then the courier delivered everything to the wrong address and I had to spend 2 days tracking it down. I know that it's not my responsibility, but if you don't help yourself, nobody else seems to give a toss. Then I opened the box....
Anyone reading this that does their own maintenance knows the reputation of the "Blue Box Bits". Had I known what I was going to get I wouldn't have ordered, but the ad didn't make it too clear, or maybe I didn't read it carefully enough. Anyway, having waited nearly 2 weeks for the stuff I needed to get on with the job. I can see myself replacing the pads sooner rather than later, though. The fitting kit that I ordered seemed OK with all the new bits - retainer pins, springs and split pins....
First stage, then, is to get the wheels off. Now, having had the wheels balanced a while ago I hadn't tried to take them off since. The usual tools had no effect on the nuts whatsoever - they were seriously tight; so much so that I managed to bend the Landrover-original wheelbrace.
It should be the shape of the one on the top. A good job I discovered it now as to have this problem with wheel nuts while at the side of the road wouldn't be too great. It took an impact socket and a 5 foot lever to get the buggers off.
Stripping the hubs back to the bearings is easy enough and the front wheels had a tiny bit of play that I felt needed to be taken out. Sandy at the garage suggested that a "tiny bit" of play is OK, but what's a "tiny bit"? I decided to set the bearings again with the torque from the manual and see what happens. I replaced the drive flanges while I was at it, since these seem to wear out quite quickly.
Getting the wheel spacers off was quite easy -I was expecting a fight - and the front drive flange bolts had been replaced with some with socket heads. I was a bit worried that if these "rounded" when I put the key in, I'd have more trouble getting them off than if they were the standard hex bolts, but they came out really easily despite being coated with more Loctite than they really needed.
It took a lot of work with taps and dies to get it all off and clean the holes.
Difficult, but if you look closely you can see the difference in the shape of the "teeth" on the flange and the space between them - the new one's on the top. On "Daphne" I replaced them with heavy-duty items but never felt totally convinced that this is the right thing to do. The flanges are a sacrificial item and a bit easier to change than a halfshaft, certainly easier to carry spare flanges than spare shafts. If the flanges are stronger the next item in the chain to wear out would be the splines on the halfshaft....I think I'll stick to carrying spare flanges.
With all that done it was time to replace the brake fluid. I used one of these to make the job "easier"....which equals not needing any help.
This is a Gunson "Eezibleed". You fill it with brake fluid and pressurise it with a spare tyre, the idea being that as you take fluid out at the caliper it gets replaced automatically at the reservoir so removing the need for a helper to pump the brake pedal to achieve the same result. And it works....but only for the front brakes - the ones closest to the master cylinder. I had no joy at all with the rear brakes despite pumping the "system" up to over 30psi - the maximum advisable is 20 - and taking the risk of something bursting and spraying brake fluid all over the place. In the end I gave up and The Sorcerer's Apprentice had to be dragged out of the kitchen to assist.
Then it was time to replace the rear brake pads. An easy job, takes mere minutes, and we've got all new parts, right, so no scratching around for replacement split pins and all that....Now, you'll recall my wariness of the "Blue Box" contents? Here's a typical problem:
The new retaining pins are shorter than the old ones. The part number is supposed to be the same as the ones I'm replacing. The result is.....
....the new ones are too short and the split pin that holds the whole lot together won't fit. Britpart, AKA "Sh*tpart" to many people. I had to reuse the old ones. Nice new springs, though.
Finally, on with the new boots. Shiny wheels, too. Good to go.
Finally, the annual MoT test will be due when we get back, and the rules have changed so that any removal of emission regulators etc will mean Elly not getting a "pass". Since the PO had removed the EGR regulator - and I did the same on Daphne since they do nothing but gum the system up with old oil - this bit of the engine needed to be replaced. A search of the internet revealed that the cost of these things is enormous, and added to that all the bits of hose, solenoid etc needed to put everything back was even more expensive. Given that most people would've thrown the parts away after removing them years ago, there is probably going to be a lot of folk searching for cheap bits from scrapyards across the country. I reckon, anyway, so I picked up some stuff from eBay to refit. Might be a waste of money but maybe not. Anyone want to bet?
The story of our travels in (and conversions of) Landrover Defender 110s - "The Mechanical Camels" - from the Scottish Highlands to the Sahara desert...
Showing posts with label Minor maintenance.. Show all posts
Showing posts with label Minor maintenance.. Show all posts
Monday, 5 February 2018
Thursday, 18 January 2018
Start the clock..
The countdown begins. 3 months 'til the next trip and quite a lot to do to get ready. As usual I've been putting off some of the spannering as the winter weather doesn't encourage it. Cold metal, cold fingers; but I'm going to have to get on with it as I'm working away from home for most of March. So in effect I've only got 8 weeks left to get it all done, not the 12 that you'd think. This shouldn't be a problem but since everything has to come by mail it adds to the time everything takes and needs a lot more forward planning. For instance, it's not like I can just run around the corner to get a gasket or a special washer if I find that I haven't got one lying about when I get to that point in a job. Everything has to stop until the next week 'cos it takes at least 4 days for bits to arrive and if there's a weekend in between, which there usually is, then you can add another 2 days. The temptation is to "make do" with something else, which is OK for a Field Fix but not really an option at home.
Alternatively, I could go to the local Landrover dealer. They might as well have this stuck on the door...
...and they generally have "to make it a special order" as they don't keep anything useful in stock. That's 3 days and 4 times the on-line price. If I'm lucky.
Sitting in the back and sheltering from the gales last weekend I had a think about sorting out some of the limited storage. The area under the gas bottle and "flight boxes" can't be accessed very easily and is just a long tunnel.
That's where the warning triangles and wheel changing kit lives, together with other stuff that's long and thin. It's on a pull out board but this always jams as the stuff on it doesn't stay put. Time to make that a bit more user-friendly. After all, if I'm going to need it I'll probably be in a hurry, it'll be dark and cold and Really Useful Things - like the wheel nut key - will probably finish up falling into the water/mud/sand/snow and being lost.
A few bits of plastic along the sides help to keep everything in the right place and the "tool board" can be made up so that everything holds everything else in place.
Here's the table support with the wheel brace and extension lever/tube inside it. Fitted to the other side are 2 tyre levers, and the all-important wheel nut key is on a bolt passed through the board and there's a wing nut to keep it there. Maybe I should try to get a spare one - losing it would be a potential problem as I doubt that anything I could "bodge" would easily undo a wheel nut. Given that we rarely leave the vehicle anywhere unsafe, we could be better off not using them at all.

Alternatively, I could go to the local Landrover dealer. They might as well have this stuck on the door...
...and they generally have "to make it a special order" as they don't keep anything useful in stock. That's 3 days and 4 times the on-line price. If I'm lucky.
Sitting in the back and sheltering from the gales last weekend I had a think about sorting out some of the limited storage. The area under the gas bottle and "flight boxes" can't be accessed very easily and is just a long tunnel.
That's where the warning triangles and wheel changing kit lives, together with other stuff that's long and thin. It's on a pull out board but this always jams as the stuff on it doesn't stay put. Time to make that a bit more user-friendly. After all, if I'm going to need it I'll probably be in a hurry, it'll be dark and cold and Really Useful Things - like the wheel nut key - will probably finish up falling into the water/mud/sand/snow and being lost.
A few bits of plastic along the sides help to keep everything in the right place and the "tool board" can be made up so that everything holds everything else in place.
Here's the table support with the wheel brace and extension lever/tube inside it. Fitted to the other side are 2 tyre levers, and the all-important wheel nut key is on a bolt passed through the board and there's a wing nut to keep it there. Maybe I should try to get a spare one - losing it would be a potential problem as I doubt that anything I could "bodge" would easily undo a wheel nut. Given that we rarely leave the vehicle anywhere unsafe, we could be better off not using them at all.
The 2 warning triangles sit snugly between....
...and the rest of the stuff interlocks - scrubbing brush, dust brush, hammer and the lock for the back door.
It all slides in and out perfectly without anything jamming or falling out into the road. Lovely.
Do I need to get a life?
The wiring to the work light on the driver's side is sorted after I reconnected the wires to the right part of the switch, and the correct parts to connect the CB co-ax to the antenna have arrived. I tried to set the system up last weekend - while I was hiding from the wind - but all the readings on the SWR meter were in the red, which suggested a short circuit somewhere. Since the only part of the system that I'd interfered with was the antenna connection, it was going to be the likely culprit. In other words, if it's electric and I've done anything to it, it'll be me that broke it.
I sent a photo of my attempt at a connection to Jan at Norfolk CB Radio and after he'd stopped laughing pointed out that I'd put the connector on upside down...The new bits cost a fiver and are idiot-proof. Just as well.
A bit of soldering and everything ought to work a bit better. While kit like this might be useful in an emergency - which is why I want it to work properly - we've never really felt the need for a CB except for the Trail-of-Ducks trip we did in the Alps in 2014. The commercial guide/leader/organiser insisted we have one but two of the participant crews couldn't get their's to work on the frequency everyone else was using but could still chat to each other. Strange, and I know enough (despite what you've already read) about radios to know it made no sense. Halfway through the trip I had a thought and retuned our CB to the equivalent European channel to the UK one that we were all supposed to be on, to hear the two "silent" crews having a lively discussion about some of the rest of us, and it wasn't flattering. To us nor them. I switched back to the proper channel and kept quiet....for a day or two. Another thought - the authorities in Morocco aren't keen on CB radios and similar kit, so the whole lot has to be disconnected before we get to Tangier-Med....in theory, anyway.
Saturday, 23 December 2017
Elecktrikery
Time to have another go at the electrics, I thought.
The original design had the fuses for the back end located neatly Out-Of-The-Way in one of the stowage bins. So neatly OOTW, in fact, that they were damned difficult to get to if Elly was loaded. Added to that the Masterpiece of Design that now allows us to move the Engel fridge OOTW neatly denies access to them. Rather than risking a hernia trying to move a fridge full of booze and other cold essentials, the fuses had to be moved.
This entailed removing the passenger seat, so we did a few little modifications to the fixings for that, so we could get easier access to the battery box....more of that later,
The fuse box has now been moved from the back of the bulkhead to the front. While this reduces the rearward travel of the seat by a tiny bit, the ease of access more than makes up for that. While the seat was out, another 12v socket was added to make life a bit easier under the awning.
The socket is supposed to be waterproof and it might well be, but the cover doesn't seem to be a close enough fit to keep water out, so we'll see how it performs - Amazon, standby for a complaint if it corrodes. Anyway, I took the time to label all the wires in the battery box with plastic discs or bits of tape to make tracing faults a bit easier in future. I suppose I should really make up some kind of diagram to show where all the wires are going, but for the moment the photos will do.
The biggest pain if you fit seats that don't have removeable squabs - and that's the vast majority of after-market seats for a Defender -is that access to the battery becomes impossible unless you take the whole seat out. This is a nuisance. We had a think about our arrangements and, by slightly modifying the front fixings the seat can be tilted backwards just enough to get useful access to the batteries.
I wouldn't recommend this arrangement for any complex work, but to disconnect the batteries for maintenance it'll work well enough. With this in mind I disconnected the main battery prior to trying to replace the standard 65A alternator with our spare 100A unit. Unfortunately I couldn't get the bolts undone! I dunno why they're so stiff but the effort needed to shift them was beginning to round off the bolt head on the upper bolt and the lower one wouldn't move at all. Rather than risking sheared bolts or knackered heads I replaced all the wires and retreated. We'll have a re-think on this one later.
With the electrics disconnected, though, we had a re-jig of the dashboard.
![]() |
| The new-look office |
![]() |
| The ashtray with a mounting plate installed |
![]() |
| ..and a backing plate to hold a small tablet |
The backing plate is the one we made previously that hangs from the mirror mounting. Used this new way it can be road-legal and might mean we can get rid of the Garmin for some of the time. The Garmin is still quite useful for Olaf routes though, so we won't get rid of it completely.
The "horns" don't need to be this big so they'll be trimmed off eventually, although often when I do things like that I find that I could've found another use for the thing I've just cut up - if I hadn't been so quick with the saw.
The ammeter still hasn't been wired in since the LEDs on the T-Max system (the blackbox-with-yellow-writing) give me as much info as I need regarding the charging process. It fills an otherwise gaping hole- like the CHT gauge - but I'm thinking of putting something more useful in its place, maybe an oil pressure gauge. An electrical one will be fairly easy (hah!) to fit and be a bit more useful.
The move wasn't straightforward, of course, given that it involved disconnecting, re-routing and reconnecting wires but I only blew one fuse and everything works as before. I think....
The angled mounting for the gauges lets me see the faces very easily but I think I'll have to put some kind of blanking plate over the top and maybe underneath to stop stray light leaking out.
The front work light is now, at last, wired in. I debated whether to route the wiring via a relay but as it only draws a few amps I've run the power straight through the switch. It doesn't look very bright, though.
Finally, we got around to applying some of the stickers that people in the trade very kindly donated. A big Thank You to:
and
for their support for our 2018 plans.
We've got quite a lot of new kit on Elly and a lot of it has come from the suppliers mentioned above.
Friday, 15 December 2017
Something's still dripping...
...and it's not melting snow.
The fuel tank leak is now top of the list for fixing and we've been running the fuel level down to almost nothing to make dropping the tank a bit easier. With all the required spare parts delivered the stage was set, then this arrived:
It was almost empty and actually nowhere near as heavy as I was expecting it to be. With hindsight I could've got it out myself easily enough but the reason I didn't try was 1. the lack of decent access underneath and 2. if it had turned out to be too heavy for me to handle alone, I'd have been in a bit of a jam. I didn't fancy being trapped underneath it, trying to stop it ripping free and yelling for help that wasn't going to arrive....the garage is quite a way from the kitchen!
So, it went to the garage - and a proper ramp - to be removed. The jetwashing I'd given it to get the crud off before we took it out has succeeded in removing most of the original paint. The bare metal doesn't seem to have had any primer on it, so no surprise that it just washed off in sheets. What was a surprise was how clean the steel was underneath. In fact, not a spot of rust at all - it looked, once I'd cleaned off the rest of the old paint, like polished aluminium and probably weighed about the same, too.
The old fuel return pipe was leaking from 2 places - around the seal...
...where 2 of the fixing screws had been stripped and were basically just resting in the holes. I fitted a new seal and pipe. The old pipe was probably OK but as we were there it made no sense to refit the old one.
The vent pipe - if that what it was for - is redundant and had been "closed" with another of PITA's bodges - see the post from last summer - so we replaced our "field fix" with the proper seals.
A coat of cold galvanising primer finished the prep...
The fuel tank leak is now top of the list for fixing and we've been running the fuel level down to almost nothing to make dropping the tank a bit easier. With all the required spare parts delivered the stage was set, then this arrived:
The view from the kitchen window suggested that this was NOT the time to be taking Elly off the road! Given that the only reason we bought a Landrover in the first place was to cope a little better with the Highland Winter snow, it seemed a bad idea to be without one now it was back.
The weather improved a bit towards the end of the week so, with a lot of care and help from Ian Watt's guys, we took the tank out...
It was almost empty and actually nowhere near as heavy as I was expecting it to be. With hindsight I could've got it out myself easily enough but the reason I didn't try was 1. the lack of decent access underneath and 2. if it had turned out to be too heavy for me to handle alone, I'd have been in a bit of a jam. I didn't fancy being trapped underneath it, trying to stop it ripping free and yelling for help that wasn't going to arrive....the garage is quite a way from the kitchen!
So, it went to the garage - and a proper ramp - to be removed. The jetwashing I'd given it to get the crud off before we took it out has succeeded in removing most of the original paint. The bare metal doesn't seem to have had any primer on it, so no surprise that it just washed off in sheets. What was a surprise was how clean the steel was underneath. In fact, not a spot of rust at all - it looked, once I'd cleaned off the rest of the old paint, like polished aluminium and probably weighed about the same, too.
The old fuel return pipe was leaking from 2 places - around the seal...
...where 2 of the fixing screws had been stripped and were basically just resting in the holes. I fitted a new seal and pipe. The old pipe was probably OK but as we were there it made no sense to refit the old one.
The vent pipe - if that what it was for - is redundant and had been "closed" with another of PITA's bodges - see the post from last summer - so we replaced our "field fix" with the proper seals.
A coat of cold galvanising primer finished the prep...
and the last job was to refit the fuel sender unit. Now, a confession...I hadn't really inspected this bit of the pipework too closely. I thought I'd found all the bodges when we removed this masterpiece of engineering from the bottom of the tank:
It's fuzzy because I was laughing too much. All the fuel hoses turned out, once we'd got them off the fittings, to be too small for the pipes that they were meant to fit. Unfortunately I hadn't noticed that the correct nuts, back nuts and olive had been removed from the sender unit and a bit of rubber pipe substituted, clamped on with a Jubilee clip. This clip was rusted solid and the attempts to free it saw the IW fitters break the pipe on the sender. With hindsight, we should've just cut the hose away. It being Friday afternoon, there was no way we were going to get a replacement sender much before the middle of the following week, so I decided to try to fix the broken one.
![]() |
| The remains of the broken plastic pipe can be prised out of the connector |
I drilled out the old fitting with an 8mm bit having pulled out the pickup pipe. This pipe has a tiny O-ring on it, so I was able to push the pipe through the new hole and it still sealed fairly well. With enough pipe sticking through to fix the fuel hose onto, I filled the fitting with JB Weld.
![]() |
| The pickup pipe pushed through the internal sleeve and bonded in place |
Putting it all back together was easy enough having given the tank a coat of black paint and some underbody sealant on the vulnerable front face. Now we come to the reason for all this work....
![]() |
| The serial number on the hose gives away its proper use. |
This is a 120mm length of Camping Gaz hose. It happens to be almost the correct internal diameter to fit onto the fuel return pipe on the top of the tank, which is presumably why PITA chose to use it instead of spending about 5 pence on a length of the correct fuel hose. The little Jubilee clip wasn't done up tightly enough to crush the hose - a bit too big (unlike all the other bloody hoses we've changed which were too small) - onto the pipe. The hose was so loose it just pulled off. Added to that the material it was made from isn't designed to carry diesel fuel so has gone harder than bone. Not only did the whole setup leak whenever the long-range tank had fuel in it, the drips blew back along the tank to the back, collecting dirt as they went and plastering the bottom of the tank with filthy, smelly crud. After a while the whole back end stank of fuel. The leak only stopped when the level of fuel in the LR tank dropped to zero since it was now below the level of the return pipe. 3 days and a lot of effort and money to repair this silly bodge......
The "new" tank has had all the areas that are likely to leak or need monitoring moved to more accessible positions, so any future work hopefully can be done without having to dismantle half the back end of the vehicle. Another lesson learned.
Subscribe to:
Posts (Atom)














































